kyle
19th April 2007, 01:36 PM
SYMPTOMS
loadTOCNode(1, 'symptoms'); When you try to send or receive messages using Outlook Express or Outlook, you may receive an error message. When you try to send a message to your Simple Mail Transfer Protocol (SMTP) server, you may receive the following error message: The connection to the server has failed. Account: 'your_account',
Server:'your_SMTP_server', Protocol:SMTP, Port: 25, Secure(SSL): NO,
Socket error: 10061, Error Number: 0x800ccc0e
Similarly, when you start the e-mail client or try to receive a message from your Post Office Protocol version 3 (POP3) server, you may receive the following error: The connection to the server has failed. Account: 'your_account',
Server:'your_POP3_server', Protocol:POP3, Port: 110, Secure(SSL): NO,
Socket error: 10061, Error Number: 0x800ccc0e
CAUSE
loadTOCNode(1, 'cause'); The client connects to a port that is blocked or unavailable on the mail server. If the client is trying to send a message, the blocked port is 25, and if the client is trying to retrieve a message, the blocked port is 110. Refer to the error message for the protocol and port numbers.
WORKAROUND
loadTOCNode(1, 'workaround'); To work around this behavior, make ports 110 and 25 available. By default, ports 110 and 25 are available when the Exchange Server services start. The ports 110 for POP3, 119 for Network News Transfer Protocol (NNTP), and 143 for Internet Message Access Protocol (IMAP) are automatically opened and made available on the Exchange Server computer when the Information Store service starts. Port 25 is automatically made available when the Internet Mail Service starts. If these services do not start, the ports are not available.
If the services are running, you can verify that these ports are listening (open) on the server by using the Netstat utility that is included with Windows NT Server: 1.Open a command prompt on the Exchange Server computer. You have to modify the command prompt properties, because the data scrolls off the screen. Open the command prompt, right-click the upper-left corner of the window, and then click Properties. Click the Layout tab, and then change the screen buffer size to 1,000. Apply the change. You are prompted to modify either the current window or the shortcut that you used to start the command prompt. You can modify the shortcut for future convenience. 2.At the command prompt, type netstat -an. Scroll back to the beginning of the data output, and look for the following entries.
Proto Local Address Foreign Address State
TCP 0.0.0.0:25 0.0.0.0:0 LISTENING
TCP 0.0.0.0:110 0.0.0.0:0 LISTENING
If these entries are present, Exchange Server is listening on ports 110 and 25 on all interfaces. This is typical. If these ports are not available, you may have to troubleshoot the following services or systems more. The following general causes may "hold" these ports, or make them unavailable: •The Exchange Server information store service is not running, or the POP3 protocol is not enabled and listening to port 110. Verify that the information store service is running. For more information about troubleshooting the POP3 protocol, click the following article number to view the article in the Microsoft Knowledge Base: 161118 (http://support.microsoft.com/kb/161118/) (http://support.microsoft.com/kb/161118/) Troubleshooting PO161118 connections to Exchange Server
•The Internet Mail Service is not running or is not listening on port 25. Verify that the Internet Mail Service is running. For more information about testing the Internet Mail Service and port 25, click the following article number to view the article in the Microsoft Knowledge Base: 153119 (http://support.microsoft.com/kb/153119/) (http://support.microsoft.com/kb/153119/) Telnet to port 25 to test SMTP communication
•A proxy server located between the client and the server may be blocking access to these ports to the Exchange Server computer. For more information about configuring Exchange Server through a proxy server, click the following article number to view the article in the Microsoft Knowledge Base: 176466 (http://support.microsoft.com/kb/176466/) (http://support.microsoft.com/kb/176466/) TCP ports and Microsoft Exchange: In-depth discussion
•Another program, such as virus-scanning software, has reassigned port 25 to another port. Disable all services that are not essential, including antivirus software, and then restart the server.
Information taken from http://support.microsoft.com/kb/191687
loadTOCNode(1, 'symptoms'); When you try to send or receive messages using Outlook Express or Outlook, you may receive an error message. When you try to send a message to your Simple Mail Transfer Protocol (SMTP) server, you may receive the following error message: The connection to the server has failed. Account: 'your_account',
Server:'your_SMTP_server', Protocol:SMTP, Port: 25, Secure(SSL): NO,
Socket error: 10061, Error Number: 0x800ccc0e
Similarly, when you start the e-mail client or try to receive a message from your Post Office Protocol version 3 (POP3) server, you may receive the following error: The connection to the server has failed. Account: 'your_account',
Server:'your_POP3_server', Protocol:POP3, Port: 110, Secure(SSL): NO,
Socket error: 10061, Error Number: 0x800ccc0e
CAUSE
loadTOCNode(1, 'cause'); The client connects to a port that is blocked or unavailable on the mail server. If the client is trying to send a message, the blocked port is 25, and if the client is trying to retrieve a message, the blocked port is 110. Refer to the error message for the protocol and port numbers.
WORKAROUND
loadTOCNode(1, 'workaround'); To work around this behavior, make ports 110 and 25 available. By default, ports 110 and 25 are available when the Exchange Server services start. The ports 110 for POP3, 119 for Network News Transfer Protocol (NNTP), and 143 for Internet Message Access Protocol (IMAP) are automatically opened and made available on the Exchange Server computer when the Information Store service starts. Port 25 is automatically made available when the Internet Mail Service starts. If these services do not start, the ports are not available.
If the services are running, you can verify that these ports are listening (open) on the server by using the Netstat utility that is included with Windows NT Server: 1.Open a command prompt on the Exchange Server computer. You have to modify the command prompt properties, because the data scrolls off the screen. Open the command prompt, right-click the upper-left corner of the window, and then click Properties. Click the Layout tab, and then change the screen buffer size to 1,000. Apply the change. You are prompted to modify either the current window or the shortcut that you used to start the command prompt. You can modify the shortcut for future convenience. 2.At the command prompt, type netstat -an. Scroll back to the beginning of the data output, and look for the following entries.
Proto Local Address Foreign Address State
TCP 0.0.0.0:25 0.0.0.0:0 LISTENING
TCP 0.0.0.0:110 0.0.0.0:0 LISTENING
If these entries are present, Exchange Server is listening on ports 110 and 25 on all interfaces. This is typical. If these ports are not available, you may have to troubleshoot the following services or systems more. The following general causes may "hold" these ports, or make them unavailable: •The Exchange Server information store service is not running, or the POP3 protocol is not enabled and listening to port 110. Verify that the information store service is running. For more information about troubleshooting the POP3 protocol, click the following article number to view the article in the Microsoft Knowledge Base: 161118 (http://support.microsoft.com/kb/161118/) (http://support.microsoft.com/kb/161118/) Troubleshooting PO161118 connections to Exchange Server
•The Internet Mail Service is not running or is not listening on port 25. Verify that the Internet Mail Service is running. For more information about testing the Internet Mail Service and port 25, click the following article number to view the article in the Microsoft Knowledge Base: 153119 (http://support.microsoft.com/kb/153119/) (http://support.microsoft.com/kb/153119/) Telnet to port 25 to test SMTP communication
•A proxy server located between the client and the server may be blocking access to these ports to the Exchange Server computer. For more information about configuring Exchange Server through a proxy server, click the following article number to view the article in the Microsoft Knowledge Base: 176466 (http://support.microsoft.com/kb/176466/) (http://support.microsoft.com/kb/176466/) TCP ports and Microsoft Exchange: In-depth discussion
•Another program, such as virus-scanning software, has reassigned port 25 to another port. Disable all services that are not essential, including antivirus software, and then restart the server.
Information taken from http://support.microsoft.com/kb/191687